Roof Skylights: A Complete Guide to Successful Installation

A dark room won’t naturally regain the brightness it deserves just by adding another window to a wall. A skylight remains the most direct solution: a glass opening in the roof that floods the interior with light at an angle far greater than any wall window can provide. That said, cutting into a roof without proper preparation leaves you vulnerable to water leaks, thermal bridges, and costly repairs as early as the first harsh winter. This guide walks you through the process from structural analysis to maintenance, ensuring your project comes to fruition without any unpleasant surprises.

Inspect the roof before drilling any holes

Any opening in the roof alters the load-bearing structure of the roof frame. Before deciding on a location, an experienced roofer must check the spacing of the rafters or trusses, identify any existing waterproofing membranes, and confirm that the intended location does not conceal a ventilation duct or a plumbing pipe. This step is all too often overlooked. That’s where the problems begin.

On a sloped roof with asphalt shingles, the ideal location is at the top, near the ridge. This position reduces the area exposed to snow accumulation above the glass and facilitates the drainage of rainwater downward. A minimum slope of approximately 15° ensures effective natural runoff.

On flat roofs—which are common in Montreal, Laval, and on the South Shore—the logic is completely different. The placement of structural supports plays a greater role in the choice than the slope. A raised curb of at least 10 cm must also be provided to prevent standing water from seeping under the dome. For the specific characteristics of flat roofs and their maintenance , additional rules apply depending on the type of membrane used.

Before starting the work, check your municipality’s requirements: some cities in the metropolitan area require a building permit for any changes to the building envelope.

Maximize your investment in natural light

The Different Types of Skylights and Their Characteristics

The market offers three major product categories, each designed for distinct uses.

The fixed model functions like a sealed skylight and cannot be opened. It is relatively easy to install, and its purchase price is among the lowest. It is suitable for living rooms, stairwells, and hallways where ventilation is not a priority. The dome can be made of tempered glass or double-wall polycarbonate, each with its own advantages depending on the situation.

The openable (sometimes called ventilated) model combines natural light with air circulation. A crank or remote control is used to adjust the opening. This is the standard choice for kitchens and bathrooms, where moisture builds up and proper ventilation prevents mold. The motorized mechanism adds to the cost, but over ten years of use, it pays for itself.

Tubular skylights are in a category of their own. They work using a reflective tube 25 to 35 cm in diameter that captures light from the surface and diffuses it indoors through a translucent ceiling fixture. Rooms without direct access to the roof (closets, hallways, interior bathrooms) can benefit from genuine natural lighting without requiring a large opening in the roof structure. Installation is less invasive, and the total cost is generally lower than that of a standard model. The trade-off: no view of the sky, and the illuminated area remains limited.

Type

Typical glazed area

Approximate cost, including delivery and installation

Estimated service life

Landline

0.5 to 1.5 m²

$1,500 to $3,500

20 to 30 years old

Opening

0.5 to 1.2 m²

$2,500 to $5,000

15 to 25 years

Tubular

ø 25 to 35 cm (tube)

$900 to $2,000

15 to 20 years

These price ranges cover labor, flashing, and caulking materials. Additional carpentry work or a complex roof will affect the total cost.

Waterproofing: The Key to Any Roof Installation

The point where the glazing meets the roof surface is the most critical area of the entire project. A poorly executed connection—even by just a few millimeters—allows water to seep in slowly, often without any visible signs inside for several weeks or even several seasons.

Flashings, typically made of anodized aluminum, form the first line of defense. They conform to the shape of the well’s edge and create a physical seal between the structure and the roof surface. On a sloped roof covered with shingles, the flashings are installed beneath the rows on the upslope side and over the rows on the downslope side, following a specific sequence. On a flat roof with a TPO or modified bitumen membrane, the flashing is welded or glued directly to the membrane. Even the slightest discontinuity becomes a path for water.

Caulking completes the job, but does not replace it. A commercial-grade roofing sealant, compatible with the surface material, seals any remaining joints. Unlike consumer-grade products sold at hardware stores, these sealants retain their flexibility at -30 °C and withstand freeze-thaw cycles without cracking.

If your existing skylight shows signs of moisture around the frame or water stains on the ceiling, schedule a targeted roof repair before the damage reaches the roof structure or insulation.

Matching selection to design, use and energy efficiency

Thermal Insulation and Glazing: High Performance in All Seasons

A skylight that loses heat during the cold season quickly becomes an expense that is hard to justify. Thermal performance depends on two factors: the glazing itself, and the space between the skylight tube and the surrounding frame.

For glazing, the minimum recommended in our climate is double-pane glass filled with argon gas and featuring a low-emissivity (Low-E) coating. Argon gas, which is less conductive than air, slows the transfer of heat between the two panes of glass. The Low-E coating reflects some of the thermal radiation inward during the heating season and outward in the summer. Triple-pane glazing with argon offers even higher R-values and almost completely eliminates condensation on the interior surface during very cold weather.

ENERGY STAR certification for Quebec (northern region) ensures that the product meets the minimum requirements for our region. Check the label before purchasing.

The space between the well pipe and the rafters must be filled with rigid or semi-rigid insulation and then covered with a continuous vapor barrier. A thermal bridge at this location results in frost buildup inside the pipe during cold snaps and persistent condensation in the spring.

Maximize natural light based on orientation

The orientation of the well directly affects the quality and quantity of natural light throughout the seasons.

  • North: Diffused, steady light with no direct glare. Ideal for a workshop or reading room where consistency is key.
  • South: maximum sunlight, which is especially valuable during the cold season. Awnings or tinted windows help reduce excessive solar gain in July and August.
  • East: soft morning light. Perfect for a kitchen or dining room.
  • West: Sunny in the afternoon and into the evening. In the summer, keep an eye on rooms facing this direction to prevent them from overheating.

The size of the window also plays a role. As a general rule, aim for about 10% of the room’s floor area to ensure comfortable lighting. For very dark rooms or those facing north, this can be increased to up to 15%.

Tubular skylights, thanks to their highly reflective tubing, operate efficiently even with minimal direct sunlight. This makes them particularly useful for partially shaded areas of the roof.

Choosing the best type of skylight for your project

Maintenance and Longevity: What to Do Every Year

A properly installed skylight requires little maintenance, but performing basic maintenance will ensure its longevity. Twice a year—in the spring and fall—perform the following checks:

  • Clean the glass surface with a non-abrasive cleaner to remove limescale and traces of pollution.
  • Inspect the flashing and the caulking around the eaves. Any cracks or peeling must be repaired before the rainy season or the first snowfall.
  • Remove any debris (leaves, branches) that could cause water to pool on the surface or block the flow toward nearby drains, especially on a flat roof.
  • Check the opening mechanism and rubber seals on models that open; a dry seal will crack and lose its watertight seal quickly.

The lifespan of the sealant between the two panes of a double-pane window is approximately 15 to 25 years. When condensation appears between the panes of glass (a sign that the argon has leaked out and the sealant has failed), the glass must be replaced—not necessarily the entire frame.

Owners of products that are more than 20 years old are often better off planning for a complete replacement. Advances in R-values and Low-E coatings over the past decade have made newer models significantly superior to those installed before 2005.

Get a free quote for your project

Toiture Grand-Montréal serves Montreal, Laval, the South Shore, and the entire metropolitan area. Our RBQ-certified roofers will inspect your roof structure free of charge, advise you on the type of skylight best suited to your home’s layout, and install it according to industry standards—from cutting to final sealing. Fill out our online form or call us to get your no-obligation quote for a skylight . A roof inspection is included in the process.

Frequently asked questions

Can you install a skylight on a flat roof without the risk of a leak?

Yes, provided that the frame is raised at least 10 cm above the surface of the membrane and that flashings are welded or heat-bonded, depending on the type of membrane. The slope of the glazing (domed or sloped) promotes water runoff and prevents water from pooling. An experienced flat-roof contractor will know how to adapt the method to your existing membrane.

The tubular model channels light through a reflective tube from the roof surface to a ceiling diffuser. It is suitable for small rooms without direct access to the roof, is less expensive to install, and creates few thermal bridges. The classic model (fixed or opening) offers a larger glazed area and a view of the sky, but requires a larger structural opening in the roof frame.

The cost varies depending on the type you choose and the complexity of the frame. Expect to pay approximately $1,500 to $3,500 for a fixed model, $2,500 to $5,000 for a hinged model, and $900 to $2,000 for a tubular model, including materials and installation. Work to reinforce the roof structure or the need to partially replace the roof membrane may increase these costs.

A visual inspection twice a year—in the spring and fall—is sufficient in the vast majority of cases. If you’ve experienced a hailstorm or high winds, a one-time inspection is necessary to ensure that no flashing has shifted. Any cracked or loose sealant should be repaired immediately to prevent gradual water infiltration.

Low-E double-pane windows filled with argon are the minimum recommended for our region. Triple-pane windows offer superior thermal performance (higher R-value) and almost completely eliminate condensation on the inner pane during very cold nights. For poorly insulated homes, large north-facing windows, or regions subject to extreme cold, the additional investment easily pays for itself over ten years of heating bills.

Glazing with condensation between the layers, visible cracks in the dome, or persistent leaks despite re-sealing are clear signs that replacement is needed. A structure in good condition with only a faulty flashing joint can often be repaired at a lower cost. A professional can assess the condition of the entire system in just a few minutes during a roof inspection.

Free quote with no obligation